Monday, March 31, 2008

Weekend progress

Good weekend for working on the coupe. First, I changed the oil, which had been contaminated with coolant during the intake manifold excitement. It came out looking creamy. I guess the oil has enough detergents to keep the water in suspension rather than letting it settle out.

Next, I installed the battery in my new battery frame. The battery is still located in the same location under the trunk and just behind the differential. After all the trouble I went through building my aluminum battery box, I just wasn't happy with it. I didn't like the fact that it was held in by aluminum rivets loaded in shear. The new frame is welded steel, and it is very strong. A little gloss black spray paint to match the power coating and hide my ugly welds and it looks great too. I should have some pictures, but I don't.

I got it to idle by adjusting the throttle stop screw. Seems to be OK now. The timing was dead on at 10 BTDC. So I guess I did it right when I set the distributor.

Then the big task was an access panel for the driver side footbox. I have mounted some terminal strips, a fuse, etc. up there, so I needed access. I really liked Detroit Kim's access panel on the ffcobra forum. So I attempted to emulate. Mine isn't as good, but it isn't too bad, either:



The rivets hold a clip on the back side that secures the rear part. I'll put a few rivnuts top, bottom, and front to secure it. But the back will actually slide under the body a little bit, so the clip will avoid some inaccessible fasteners.

No comments: