Sunday, June 22, 2008

Electrical progress

Electrical system
  • Connected all power wires at I*Squared power controller
  • Routed headlight and highbeam wires
  • Cut hole and installed grommet in tranny tunnel cover aluminum
Dash
  • Attached dash ends
  • Mounted dash

Saturday, June 21, 2008

New format, and new progress

It's been a while. I'm going to try out a new format for these blog posts. I hope will help me just dump the information on here without spending a lot of time thinking about what to write.

Footbox electrical panel
  • Fabricated and installed aluminum electrical panel to fit under access panel. Original panel was not well positioned for access.
  • Installed terminal strips and fuse holder in new electrical panel.
Steering column
  • Removed and replaced steering column to resolve u-joint that had slipped and was binding.
  • Tightened all set screws.