(2.5 hours yesterday and today, 11 hours total)
I mounted the lower control arms. At first, they didn't appear to fit correctly. I posted a question on ffcobra.com and got a very quick answer, saying that yes, I was doing it correctly. I just needed to install a couple of "shims" (i.e., washers).
I then put in the coil-overs. This time, when they didn't really fit with the provided spacers, I didn't miss a beat. I just ground down the spacers a little bit and made them fit.
Not much more to do at the front end until I get the spindles next week.